Compressed Knitted Filter Element - Rings, Seal, Pad, Mufflers

Compressed galvanized knitted mesh filter element
Material: galvanized steel wire.
Compressed knitted thickness 8 mm: 0.3mm.
Free volume: 85% ± 3%.
Filter diameter: 29mm ± 0.2mm.
Thickness: 9.5mm ± 0.2mm.

Compress knitted mesh rings for emission control systems
Materials: stainless steel 1.4404.
Wire diameter is 0.18 mm.
Outer diameter is 285 +/- 0.5 mm.
Inner diameter is 272 +/- 0.5mm.
Thickness is 10 +/- 0.5.
Density is 0.69g/cc.

Knitted wire mesh seal for diesel particulate filter axial load absorber purpose
Outer diameter: 300.3 mm.
Inner diameter: 267.8 mm.
Compressed knitted thickness: 8 mm.

Compressed knitted mesh filter- Stainless steel AISI 304
Wire diameter: 0.15 mm to 0.6 mm.
Diameter: 28 mm.
Thickness: 40 mm.

Compressed Knitted mesh pad - AISI 316L
Wire diameter: 0.25 mm.
Density: 205.46 kg/m³.
Volume: Option A: 8.459 m³, Option B: 5.623 m³.

Knitted wire mufflers for heat shield at the catalytic converter. (Gasoline)
D_outer:15 mm.
D_inner:10 mm.
Width: 5 mm.

Engine inlet pre filters
Knitted wire mesh pre filters for an engine going in a desert environment.
Size: 530 mm × 335 mm.
Thickness up to 20 mm.

Compressed knitted mesh filter is always customized for specific application. Different thickness, wire diameter, density mean different filtration effects. So it is hard to say which one is standard. Thus, there is no standard size for them, but customized one can meets your needs well. And we are sure our products will not let you down.