Stainless steel 321 Demister pad
Demister pad 3600 × 150mm, ss321, CO₂.
Material, housing: stainless steel 321.
Material, separator: ss 321.
Service, fluid: CO₂ and steam.
Size: dia 3600 × thk. 150 mm.

SS316L demister pads
Material: AISI316L.
Demister pad size: Ø930 × 110 mm height.
Structure: 3-piece construction.
Top & bottom grating size: flat bars 20 × 5 mm, round bars Ø 6mm.
Total height: 150 mm.
Density of 215.32 kg/m³.

SS316L demister
Material: AISI316L.
Demister pad size: Ø510 × 110 mm height.
Structure: 1-piece construction.
Top & bottom grating size: flat bars 20 × 5 mm, round bars Ø 6mm.
Total height: 150 mm.
Density of 198.25 kg/m³.

Demister Pad
Density 190 kg/m³-SS304.
Pressure: 1.76 Kg/cm².
Temp.: 150 Deg. C.
Dp. Thickness: 200 mm.
Plate Thickness: 3 mm.

Demister Pad - 1500 × 375 × 150 × 3 mm - SS304
OD: 1500 mm.
Sectional: 375 mm.
Width: 150 mm.
Thick: 3 mm.
Density: 144 Kg/m³.
Operating Condition: Work Press.: 42.2 Kg/cm², Work Temp.: 37 Deg. C.

Wire mesh demister
Material: SS 304 & SS 316.
Wire dia.: 0.24 mm.
Square hole about 6 mm.
Size: 65 cm × 30 m.

Wire mesh demister with carbon steel grid supports
Outer diameter: 14 7/8''.
Thickness: 8''.
Mesh quality: AISI 304ss.
Mesh density: 150.56 Kg/m³.

Wire mesh demister with carbon steel grid supports
Outer Diameter: 14 7/8''.
Thickness: 4''.
Mesh quality: AISI 304SS.
Mesh density: 164.85 Kg/m³

Food grade stainless steel knitted mesh pads
Material: AISI304 wire.
Wire size: 0.12 mm, 0.15 mm.
Use ultrasonic cleaning.
Size: 12.7 mm dia × 2 mm height, 14mm dia × 1.5 mm height.
Used in the vaporizer, and need to be put on the heat coil to afford 230 degree.

Knitted wire mesh rolled part
Made from wave knitted wire mesh.
Material: 1.4301, AISI 304.
Wire: 0.28 mm to 0.35 mm.
Weight: 30 g - 35 g per piece.
Used to fill a cylindrical space.

Stainless steel demister pad
Wire diameter 0.011".
High 4".
Diameter 12".
Density 8.6 lb/linear ft.

Demister pad stainless steel 304
32 swg wires.
98% open area.
Bulk density: 144 kg/cu.m (9 lbs/cu. ft).

Monel demister pad
Consisting: layers of knitted fine monel wire mesh , assembled in multiple layer section, supported and sandwiched in monel lightweight grids.
Thickness: 170 mm.
round shape for vessel.
Diameter: 756 mm.
8 pieces.

Monel wire mesh demister pad
Consisting: layers of knitted fine monel wire mesh , assembled in multiple layer section, supported and sandwiched in monel lightweight grids.
Thickness: 200 mm.
Round shape for vessel.
Diameter: 2196 mm.
12 pieces.

Square shape monel demister pad
Consisting: layers of knitted fine monel wire mesh , assembled in multiple layer section, supported and sandwiched in monel lightweight grids.
Thickness: 170 mm.
Square shape: 485 mm × 485 mm.
12 pieces.

Wire Mesh Mist Pad
24" high × 24" wide × 12" Thk.
9# Density.
304SS material.
demister pad that use in a gas refinery.

Knitted Mesh Mist Eliminator
Flow rate 600 1,200 and 2,400 m³/hr.
Operating pressure = 200-300 Mbar.
Pressure drop not exceed 30 Mbar.
Droplet size 3 microns.
Material: SS316L.

Evaporation demister mesh: high quality SS 316 or SS 304 of demister pad that can be used for evaporation vessel in order to produce clean vapor and water.

Package: Put into plastic bags then in wooden cases and on pallets.

Demister pad in PP, PE, PVC materials also can be offered. If you need demister pads, please confirm the details as above, such as materials, demister size, structure, wire diameter, and density. All the standard demister pads are in density of 168 kg/m³. Meanwhile, custom density is also available.